Storage recommendations
How to store lagging:
- Stock usage based on a first-in first-out method (FIFO).
- The storage room for lagging must be cool, dry and dust-free.
- Avoid storage places near sources of ozone generating equipment.
- Do not store outside.
- Avoid storage in direct sunlight and strong artificial light as UV light can damage the products and may lead to a premature ageing.
- Under no circumstances should fuels, lubricants, acids, disinfectants, solvents or other chemicals be stored in the same storage area.
- Keep the storage place clean. Protect the material from dust, water etc. with suitable coverings.
- Allow 24 hours before use when lagging is removed from cold storage.
Shelf life
DIRECT BOND LAGGING AND WEAR PANELS
- Stored <25°C
COLD BONDING LAGGING AND WEAR PANELS
- Stored <25°C 3 years shelf life
- Light buffing of bonding surfaces is recommended if over 4 months from production date
HOT VULCANISED LAGGING AND WEAR PANELS
- <7°C and away from UV and ozone generating equipment 12 months
ADHESIVES AND PRIMERS
- Store in flammable goods cabinet
- Stored <25°C
- Shelf life:
- Primers 2 years
- Cold bonding adhesive 2 years
- Hot vulcanising adhesive 4 months
- Direct bond adhesive 2 years
Products stored under the above conditions for longer periods of time than recommended need to be re-tested for adhesion before being used. If any doubts on storage recommendations, contact Elastotec.
